Panasonic ideas for life Global

FAQs

  • Font Size
  • S
  • M
  • L
  • Security Systems > Encoder Decoder > How long is it possible to extend cabling distances about coaxial cables when it is input a video output signal of analog cameras to WJ-GXE500?
  • No : 6785
  • Open Date : 2018/04/13 14:04
  • Print

How long is it possible to extend cabling distances about coaxial cables when it is input a video output signal of analog cameras to WJ-GXE500?

Category : 

Answer

It is possible to extend cabling distances until less than about 400 m when using coaxial cables of 
RG-59/U, BELDEN 9259 (for NTSC models), 5C-2V (for PAL models) or equivalent cables.
 
When using the cable compensation, it is possible to extend cabling distances in the following.
 
  S: Less than about 400 m (1300 ft.)
  M: From about 400 m (1300 ft.) to 700 m (2300 ft.)
  L: From about 700 m (2300 ft.) to 1200 m (4000 ft.)
 
Further information is available at the item
 “[Image/Audio] page - [Coaxial/RS-485] tab” in Operating Instructions for WJ-GXE500.
 

Was this FAQ helpful to you?