It can be confirmed according to the following procedure.
1. Click the [Setup] button, click the [Server] button and select the “NTP” tab
2. In “Time adjustment”, select “Off” and click [Set] button.
And then select “On” and click [Set] button.
*Be sure to write down date and time when this operation has done.
3. Click the [Control] button and click the [Network log] button of the [Log] box
And click the [List] button
#Search “Time & date” which was written down above procedure 2 in this list and confirm the “Log”.
If “<NTP>GET_TIME_OK” is displayed in the “Log”,
WJ-ND400 synchronizes with NTP server successfully.
#If "<NTP>SVR_ERR" is displayed in the “Log”, it means “No response from the NTP server “.
Therefore WJ-ND400 has not synchronized with NTP server.
Regarding the other logs related to NTP server, see as follow;
- <NTP>SVR_ADD_ERR: Failed to resolve NTP server address from DNS
- <NTP>SET_TIME_ERR: Failed to adjust the time
- <NTP>TIME_INVALID: Time from the NTP server is invalid
- <NTP>OTHER_ERR: Other errors for NTP